Description of side entry agitators

Description of side entry agitators

Side entry agitator has the advantages such as compact structure, high efficiency, stable transmission, low noise and easy disassembly. the stirring device is installed on the side wall of cylinder or tank equipment. Usually adopted axial flow impeller. CD’s side entry agitators are widely used in petrochemical, chemical, pharmaceutical, mineral, water treatment, pulp, coating, paint, paper, Flue Gas Desulfurization and so on.

Side entry agitator is a new type of mixer device, we can replace or repair seal or gear box without emptying the fluid in the tank. Equipped with a spiral type impeller , can get the highest mixing effect. in the case of equal power consumption.
For side entry agitator, the mixing device was installed on the side wall of tank, the impeller is usually used axial flow pattern, the type of impeller was used more. in the same power consumption, can get the highest mixing effect, power consumption is only 1/3 ~ 2/3 of top entry agitator, the cost is only 1/4 ~ 1/3 of top entry agitator. Speed can catch 200 ~ 750r/min.

Side entry agitator has the advantages such as compact structure, high efficiency, stable transmission, low noise and easy disassembly. the stirring device is installed on the side wall of cylinder or tank equipment. Usually adopted axial flow impeller. side entry agitators are widely used in petrochemical, chemical, pharmaceutical, mineral, water treatment, pulp, coating, paint, paper, Flue Gas Desulfurization and so on.

Side entry agitator is a new type of mixer device, we can replace or repair seal or gear box without emptying the fluid in the tank. Equipped with a spiral type impeller , can get the highest mixing effect.

in the case of equal power consumption.
For side entry agitator, the mixing device was installed on the side wall of tank, the impeller is usually used axial flow pattern, the type of impeller was used more. in the same power consumption, can get the highest mixing effect, power consumption is only 1/3 ~ 2/3 of top entry agitator, the cost is only 1/4 ~ 1/3 of top entry agitator. Speed can catch 200 ~ 750r/min.

Side Entry Agitator:

For large volume of storage tanks, the basic operation of blending and stirring is always executed with a side entry agitator (mixer), while a top entry mixer will be with too long shaft and require too big motor power.

Side Entry Agitator Features:

Need to install the sealing device, generally use of mechanical seals.
the stirring device is installed on the side wall of cylinder or tank equipment,
Transmission shaft with special structure design, can easily replace the mechanical seals and bearing in the case of non disassembly of the whole machine
high mechanical efficiency, compact structure, stable operation

Application:

Flue Gas Desulfurization
petrochemical,
pharmaceutical
Biofuels and bio refineries
Hydrometallurgy
water and wastewater
mineral

Typical Applications:

• Flue Gas Desulfurization (FGD) in coal-fired power generation
• General blending for bitumen, additives, lubricant, etc
• Storage tank cleaning for oil and gas industries
• Sludge aeration for waste water treatment
• Sugar dissolving in food and beverage industries

Installation:

The side entry mixer is installed onto a lateral flange with certain angle from horizontal level, meanwhile certain degrees off center, in order to achieve the maximum vortex in the tank.

our other agitator like top entry agitator